AnswerNDT · White paper · November 2026

From radiographs to defensible decisions.

How digital weld-inspection teams can trust every image, every reading and every sign-off - and check a whole site’s films in minutes instead of days.

0

stored pixels ever changed - every reading uses the original film

12 films

checked in one folder run, gauge read automatically on the DICOM films

+12-15 dB

cleaner display with Clean view on test films, gauge reading unchanged

51

security controls in 9 areas; SOC 2 audit in progress

The AnswerNDT Presentation View

Source: AnswerNDT live app.

Contents

Introduction

Digital radiography made faster and useful to trust

Detectors now produce weld images in seconds. The work that follows - opening them in each manufacturer’s software, checking image quality by eye, re-keying readings into spreadsheets and assembling reports - has barely changed. AnswerNDT closes that gap.

What we found

  1. Images are locked in. Each manufacturer saves the inspector’s view (contrast, rotation, notes) its own way; outside its software the film opens differently, or not at all.
  2. Quality is assumed, not measured. Image quality indicators (IQI) and signal-to-noise checks are read by eye, one film at a time.
  3. Evidence is scattered. The film, the readings, the review and the report live in different places; an auditor sees a PDF, not the proof.

What AnswerNDT does

  1. One viewer for every manufacturer that opens the film as the Level II saw it and never changes a stored pixel.
  2. Quality measured the way the standards define it (ASTM E2698 / E2445 / E2002), on the original pixels - and re-checked on the server.
  3. One record from upload to sign-off: workspace, readings, Level III review, report and sharing.
1

Upload

Films arrive in the right folder

2

View

Any manufacturer, original kept

3

Measure

Millimetres, not pixels

4

Check

Image quality to ASTM

5

Review

Level III sign-off

6

Share

Reports and links

Beyond the desktop viewer. AnswerNDT uses Friday NDT AI to check a whole folder of films in minutes, show a cleaner view of a noisy film, and line up a weld with its previous inspection to show what changed.

The problem

Where time and evidence are lost today

After the exposure, a digital weld inspection still passes through five hands-on steps. Each one costs time and leaves a gap in the evidence.

Exhibit 1 · The same five steps, today and with AnswerNDT

1Get films off the detector

Today: Copied by hand from each detector PC or USB stick.

With AnswerNDT: A connected computer uploads new films into the right folder on its own.

2Open and view

Today: A different viewer for each manufacturer; the inspector’s saved view stays inside it.

With AnswerNDT: One browser viewer for every manufacturer; the saved view is imported and the original pixels are kept.

3Check image quality

Today: Gauge and signal-to-noise judged by eye, film by film.

With AnswerNDT: Measured to ASTM on the original pixels; a whole folder checked in one run.

4Record readings

Today: Re-typed into a spreadsheet.

With AnswerNDT: Recorded with the film and re-checked on the server.

5Review and deliver

Today: A PDF by e-mail; who approved what is hard to prove later.

With AnswerNDT: Level III sign-off, your report template and a time-limited share link, all on the audit trail.

Source: Friday analysis of the inspection workflow described by an inspection company, November 2026.

Format lock-in

The saved view lives in image metadata, companion files or vendor-private fields - different for every manufacturer.

Manual quality checks

Gauges and SNR are read by eye; results vary between inspectors and are rarely recorded as numbers.

Re-keyed readings

Measurements move by hand into spreadsheets and reports, where errors creep in.

Weak audit trail

Who looked, what they measured and who approved it is hard to show months later.

What inspection teams are asking for

Four requirements, and how AnswerNDT meets each

These requirements come from an inspection company’s own walkthrough of how they work today.

Exhibit 2 · The four requirements

Hands-free upload

Live

Nobody should drag files from a detector PC.

Connect a computer once; new films arrive in the right folder. Drag and drop with duplicate detection for everything else.

Their own reports

Rolling out

Each company has its own report layout and branding.

Report templates - logo, colours, sections, columns, signature lines - edited by admins, chosen per site.

Sharing with primes and asset owners

Live

Results must reach the prime contractor and the owner, with evidence.

Submit for Level III review, time-limited share links, folder download with checksums.

A viewer that keeps the inspector’s view

Live

The film must look the same as the Level II saw it, on any manufacturer’s export.

Presentation View: original pixels, saved views, presentation-state import with an evidence sheet, measurements and image-quality checks.

Source: inspection-company requirements walkthrough and AnswerNDT status, November 2026.

What this means for you

  • No new hardware or desktop software: it works in the browser and on a phone.
  • Your report, your branding, your sign-off chain.
  • The prime and the owner see the evidence, not just a PDF.
Workspace and upload

Create your workspace and upload with ease

A workspace holds a company’s sites as folders and sub-folders - site, unit, weld. Friday reads every file as it arrives, so each folder can be searched and asked about in plain language.

Memory Workspace

Explorer-style folders for sites, units and welds; it opens on the folder you used last.

Easy upload

Drag files onto a folder - DICOM / DICONDE, HDF5, PDF and common images. The same file twice is recognised, not duplicated.

Connect a computer

Pair the detector PC once; new films flow into the chosen folder on their own.

Ask Friday

Ask about a folder’s welds in plain words; answers come from that folder’s films and reports.

Exhibit 3 · Sites, units and welds

Source: AnswerNDT live app.

Exhibit 4 · Drop files onto a folder - Friday reads every one

Source: AnswerNDT live app.

Exhibit 5 · Each folder’s menu: report, quality check, download, share, connect

Source: AnswerNDT live app.

Asset tab

Speed up your NDT workflow

Select a film and the Asset tab opens with everything an inspector needs before reading it - in one panel.

Open Presentation View

One click into the full viewer with the asset tools.

Quick Start

A plain-language guide in the panel: getting started, what each tool does, who can do what.

Level 2 assessment by Friday

Friday’s reading of the film and its text - weld, technique, visible indications - as a draft for the inspector.

Technique and inspection details

Operator, date, weld id, IQI, kV, mA, exposure, source and distances - entered once, used everywhere.

Quality control

Exposure, contrast, sharpness and required details screened on arrival; overrides are logged.

Workspace · Metadata · CoWork · Activity

Folder access, file details, a conversation with Friday, and the film’s full activity trail.

Exhibit 6 · Open the viewer, Quick Start, Friday’s assessment

Source: AnswerNDT live app.

Exhibit 7 · Technique and inspection details

Source: AnswerNDT live app.

Exhibit 8 · Quick Start: what each tool does and why

Source: AnswerNDT live app.

Presentation View

A Presentation View that supports many formats and preserves the original

The viewer decodes the original file on the device - including compressed DICOM (JPEG 2000, JPEG-LS, JPEG Lossless, RLE) - so every number is read from the values the detector recorded.

Exhibit 9 · Tools on the left, the film in the centre, asset tools in the Asset tab

Source: AnswerNDT live app.

Source pixels

A badge shows the film is the original; display changes never alter it.

Presentation evidence

What the manufacturer’s saved view recovered, what is not applied, and what is missing.

Mine · Crew · Review · Signed

Keep your view, share it with the crew, send it for review, sign it off (Level III).

Works on a phone

The film takes the full screen; tools open as a sheet.

Exhibit 10 · The evidence sheet: recovered, not applied, missing

Source: AnswerNDT live app.

Asset tools

Asset tools to aid the review process

Five groups of tools sit in the Asset tab next to the film. None of them changes the stored film - they change how it is shown, or they measure it.

Asset tools · View and measure

Adjust the view and measure in real units

Display & contrast

Changes how the film looks, never the film. Brightness and contrast (Auto contrast, Whole range), three ways to bring out detail - Edge lift for crisp edges, Hairline for thin lines and wires, Area contrast for large bright and dark changes - plus Smoothing and a Clean view computed by Friday NDT AI.

Why it matters: Cracks and small pores are faint; the inspector can tune the picture while the evidence stays as recorded.

Exhibit 11 · Display & contrast

Source: AnswerNDT live app.

Dimensions & line scan

Length, round size and angle in millimetres or inches. The scale comes from the file, from a known object, or from the wire gauge (Auto-calibrate). Line scan plots brightness along a line, Wall finder reads pipe-wall thickness, and Find round indications marks round spots for review.

Why it matters: Acceptance rules are written in millimetres, and wall thickness over time shows corrosion.

Exhibit 12 · Dimensions & line scan

Source: AnswerNDT live app.

Exhibit 13 · The same film in four display modes at once

Source: AnswerNDT live app.

What this means for you

  • The same film looks right on every screen, for every manufacturer.
  • Measurements are in real units, with the scale’s source shown - not guessed from pixels.
Asset tools · Image quality checks

Check image quality the way the standards define it

Signal quality

SNR (signal against the grain), CNR (how well a feature stands out) and normalised SNR, as ASTM E2698 / E2445 ask for. Propose regions picks two even areas, and a linearity check stops ratios being reported on unsuitable data.

Why it matters: An auditor’s question - was the image good enough? - is answered with a number.

Exhibit 14 · Two proposed regions on the film

Source: AnswerNDT live app.

Exhibit 15 · Signal quality

Source: AnswerNDT live app.

Resolution gauges

Reads the image quality indicator (IQI) - the strip of wire pairs placed on the part. The first pair that blurs together gives the image’s sharpness (SRb, ASTM E2002). Wire and hole gauges are judged and recorded with their evidence.

Why it matters: Standards require proof that the image is sharp enough to show flaws of the required size.

Exhibit 16 · A line drawn through the wire pairs

Source: AnswerNDT live app; line drawn by the inspector, pairs read on the original pixels.

Exhibit 17 · First unresolved pair D5: image SRb 320 µm

Source: AnswerNDT live app.

What this means for you

  • Image quality becomes a recorded number, not an opinion.
  • Readings can be recorded and re-checked on the server from the original file before they reach a report.
Asset tools · Weak spots and exports

Find weak areas and share the results

Extras & exports

Pixel value and a loupe under the pointer, diameter and wall finder, file details and Export all. Readings download as CSV for Excel and as a DICOM report other systems can archive; the inspector’s view can be saved as a standard presentation state other DICOM viewers open.

Why it matters: Results travel to the systems your clients already use.

Quality map

Colours the film by local image quality - red is weakest - or marks over-exposed spots, so a weak area is seen at a glance.

Why it matters: Weak areas are found before a client or auditor finds them.

Exhibit 18 · Extras & exports

Source: AnswerNDT live app.

Exhibit 19 · Quality map: weld and wire gauge coloured by local image quality

Source: AnswerNDT live app.

Exhibit 20 · The quality map in the Presentation View

Source: AnswerNDT live app.

Across folders and inspections

Check whole folders, clean up noise and compare inspections

This work runs on Friday NDT AI. Friday proposes and measures; the certified inspector decides.

Folder quality check

Every film in a folder re-checked against the workspace rules; the gauge on each DICOM film read automatically. Issues land in Exceptions.

Clean view

A quieter display learned from each film itself, always beside the original and never used for readings.

Previous inspection

An older film of the same weld lined up automatically - turned, mirrored, shifted, exposure matched - with the largest changes listed.

Advisory by design

Every result is a prompt for the inspector, never a silent decision.

Exhibit 21 · Folder quality check: 12 films in one run

Source: AnswerNDT live app, demo workspace. Missing technique details are flagged on every film.

Exhibit 22 · Clean view beside the original - display only

Source: AnswerNDT live app.

Exhibit 23 · Previous inspection: aligned and exposure-matched

Source: AnswerNDT live app. Alignment good; no local change above 5 sigma of the pair’s noise.

What this means for you

  • Hours of film-by-film checking become a folder run of a few minutes - nothing is missed.
  • Asset owners see how a weld changes over the years: the basis for corrosion and growth trending.
Open formats

Standard formats in and out

Results leave AnswerNDT in formats the industry already archives.

Exhibit 24 · Formats in and out
DirectionFormatUsed for
InDICOM / DICONDE - uncompressed, JPEG 2000, JPEG-LS, JPEG Lossless, RLE, baseline JPEGFilms from DR and CR systems; lossy files are flagged
InDICOM presentation states (GSPS)The manufacturer’s saved view, with an evidence sheet
InHDF5, PDF, common image formatsOther inspection data and documents
OutPresentation state (GSPS)The inspector’s view, opened by other DICOM viewers
OutDICOM Structured ReportReadings archived with the film
OutCSV · PDF report · folder .zip with checksumsSpreadsheets, clients, records

Source: AnswerNDT validation suite, November 2026 - decoder bit-exact on test films; exports read back by independent DICOM tools.

Exhibit 25 · The same film and tools on a phone

Source: AnswerNDT live app.

Appendix

Glossary and how we validated

A · Glossary

IQI
Image quality indicator: wire pairs or holes placed on the part to prove the image shows small enough detail.
SNR / CNR
Signal-to-noise and contrast-to-noise ratios: how clean the image is, and how well a feature stands out.
SRb
Basic spatial resolution: the image’s sharpness, from the first wire pair that blurs together (ASTM E2002).
DICOM / DICONDE
The standard file format for digital radiographs; DICONDE is its industrial (NDE) form.
Presentation state (GSPS)
A small standard file that records how a film should be displayed - contrast, rotation, notes.
Level II / Level III
Certified inspector levels: Level II performs and reads; Level III reviews and approves.

B · How we validated

Decoding
Compressed films vs original values
Bit-exact (0 of 1.4 M pixels differ)
Measurements
Synthetic films with known answers; device vs server
51/51 engine checks; 30/30 device-server parity
Clean view
Noise-free test films and a real DR film
+12-15 dB; gauge reading unchanged; 1.8x less noise on the real film
Previous inspection
Known rotations, flips, shifts and planted changes
Worst alignment error under 1 pixel; planted change found first
Exports
GSPS and DICOM SR read back by independent tools
17/17 and 16/16
Live app
Real-browser checks on the production app
Viewer 24/24; NDT AI features 6/6; folder check 2/2

Security & Trust

Built to be trusted with your work

51 security controls across 9 areas, monitored continuously. AnswerNDT’s film processing runs on Friday NDT AI.

Our commitment

Friday is an AI co-worker platform. We protect customer data with private-by-default workspaces, encryption, strict access control and continuous monitoring - and a Confidential mode that keeps AI processing on our own infrastructure, so sensitive work never reaches a third-party AI.

Private by default

Every workspace, memory and file belongs to its creator until it is shared.

Confidential AI mode

Sensitive workspaces run on Friday NDT AI only.

Encrypted everywhere

TLS 1.3 at the edge, HSTS, and per-user encryption keys held in a vault.

Monitored 24/7

Security alerts for failed sign-ins, infrastructure health and disk, vault and tunnel status.

Audit in progress

SOC 2 Type I and Type II

Security, Availability and Confidentiality.

Auditor
Independent CPA
Period
Report period - 12 months
Controls
51 across 9 areas

A signed NDA is required to receive the SOC 2 report and our security documents. Our team follows up with every request.

Compliance

SOC 2 Type I and Type II

Audit in progress

Security, Availability and Confidentiality.

Penetration test

Completed

Annual independent test plus continuous automated testing with Friday Trust.

ISO/IEC 27001

Planned

On the roadmap after SOC 2 Type II.

Security controls

7 controls

Access Control

Who can reach what, and how that is checked.

7 controls

Data Protection

How customer data is classified, encrypted and kept apart.

5 controls

Business Continuity

Backups, recovery and keeping Friday available.

3 controls

Endpoint Security

Laptops and workstations that touch Friday systems.

7 controls

Infrastructure Security

Networks, servers and production changes.

6 controls

Monitoring & Incident Response

Seeing problems early and handling them well.

7 controls

Organizational Security

People, policies and how we build software.

4 controls

Risk & Vendor Management

Knowing our risks and the partners we rely on.

5 controls

Vulnerability Management

Finding and fixing weaknesses before attackers do.